Have you seen my zombie??

We've been on a mission to bring Halloween back to this side of town, and Dan came up with a great way to "advertise!" We made these posters and put them up all over town. A few people said they came by because they saw the posters, so it totally worked!

We didn't have as many people as were crowding the streets over on Bay, but we had about 100 kids which is WAY more than the 20ish we had last year. If that rate of growth continues, next year will be perfect!

We had a pretty good sized crowd a few times during the evening. The kids got a kick out of hanging back and watching the next group get scared by the Giant Floating Head of Doom (Doooooom), and his buddy the scarecrow.

And as much as the kids enjoyed it, the grownups couldn't get enough!

I kept trying to get pictures of people being scared, but this is the best I could get.. One girl jumped back so far she knocked me over! Which we both thought was pretty funny :)

<-- Bob, as our Mr. Floating Head of Doom wound up being named, is also very difficult to catch on film! We finally turned off all the lights and tried one last time and you can kinda get an idea of what he looks like. He can look left and right and up and down, and he has expressions and says the funniest things! (ok, that last part is Dan being witty through a voice changing software so he sounds spooky..) That's what people enjoyed the most I think.

And this winged demon really freaked the kids out too.. it really looked like it was floating over our graveyard. The wind whipped it around perfectly!

<-- This is us at the end of the night, in between bouts of rain.

And this is the sweetest thing ever! I found this slipped under the front door when I got home from work today.. it's a hand-drawn thank you picture from a kid down the street.

And that, folks, is what Halloween is all about.
Only 362 days to go!

we -heart- halloween

This is where we left off with Halloween a couple weeks ago so we could get back to housework.. but the time is nearing and we had big plans!

<-- This little scarecrow was cute and all, but not even the 2 year old across the street was scared of him..

..so clearly something had to be done!

I found this hanging guy who looked just right for a scarecrow. Add in an old pair of Dan's pants and a bale of hay and newspapers, and viola - a scary scarecrow!

(small, stating-the-obvious side note.. hot glue, is hot! not nearly as fun to peel of fingers as elmer's glue)

Here's Dan getting the scarecrow in position.. you can't tell yet, but this one is scary in more ways than just being bigger!

Here he is all in position.

Behind him on the spider web is our floating magic mirror of doom. He's hard to get a picture of, but is very cool and creepy. He talks to our guests, which takes everyone by surprise and is surprisingly scary.

He lures you in and distracts you while..

.. mr. scary scarecrow gets even scarier!!

He's mounted to a pneumatic contraption Dan built for Halloween a few years back.

<-- This is the grim reaper who watches over the graveyard. These little faux fire cauldrons are really great for ambiance and uplighting

<-- and here's an overview of the whole house. I have to say, our house may look a little shabby still the rest of the year, but it's exactly perfect for Halloween!

It's no surprise to anyone anymore how much we get into Halloween, so when we heard there was a house haunting contest in Alameda we had to enter! The woman who started it grew up in Alameda and wants to see the island get back into the spirit of the holiday she remembers from when she was a kid. That's a concept we can totally get behind! There are a few parts of town that really do things up, but now that's where all the kids go, so the spooky spirit has died down on other parts of the island - we only had about 20 trick-or-treaters last year, while a couple other streets were swarming with kids!

So we're thrilled to be supporting that cause, and it turns out we won 2nd place! Look at the awesome gift basket and trophy!!

the beige and red and pink brick road

So, the first thing I did when I got started Saturday morning was clean all the cat poop out of the nice, loose sand after I figured out what all the flies were so interested in..

And in doing that, I disturbed this guy.. I have no idea what it is, but I'd be interested in finding if anyone knows. Especially if it's a termite queen, or something else that should be squished on sight.

After the nature hour, I picked up all the bricks I'd fit last weekend, and stacked them in order along the edge.

The first row only needed some adjustments to get it back even with the step line, but the 2nd row was a total mess.. so I got started.

One of the things I learned from doing the driveway, was that because the bricks are all different sizes and shapes and thicknesses, it was a waste of time to try to get the bed completely level and perfect before starting, like you would if you were laying brand new uniform pavers.

The bed was relatively smooth and level, and I just poured a bit of sand as I went, and had plenty more on hand to level each brick to the right spot.

Because the sidewalk is higher than where the bottom of the first stair is, I wanted to bow the walkway up in the center so water doesn't pool up right at the house-end of the bricks. Not sure I did that so well right at the stair side, but it's so important that wherever the inspector measures it's exactly the right height that I'm not sure I could've done much at that end anyway. Towards the middle and the sidewalk it bumps up a little in the middle, though you can't really tell by looking at it. We'll see what happens when it starts raining.. we shouldn't have to wait to long for that!

And here we are. All that's left to do is fill the joints in with sand to lock everything in place. (I'm still sort of amazed at how well that works!)

And voila, we're off to see the wizard!

And Dan spent the weekend on his favorite pastime, putting up the radiant heat fins. Aren't they pretty?!

and.. still working

Another weekend in which I was hoping to finish the walkway.. I realized that fitting the bricks to the shape was going to take so long that I didn't have a chance of getting the whole thing set in one weekend. And, as predicted, the first 2 rows are totally out of whack and I'll have to pull them up and reset them. In an effort to do as little duplicate work as possible, I decided to fit the whole path this weekend, then next weekend I can come back and set them.

It actually is already much more pleasant to walk on then the dirt.. which is basically sand, so if I really wanted to I could probably just sweep more in the joints and call it done, but I'd really like to have a flat, nice path for a little while

And Dan was back in the garage plowing through the staple-up. I took more pictures of him throughout the day, but they all look about the same..

This isn't the funnest project we've ever worked on, but the nights are already getting colder and the heat from this system is going to feel sooooo nice.

finally back to work

Now that we can stop digging up the dirt in front of the house, I can finally put in a proper walkway so it's not a muddy mess every time it rains. So bright and early yesterday morning I set out to prepare the ground for some bricks.

You can't see all the nails and wire and other crap so well as the giant slab of concrete extending out from the bottom stair.. Let's just say yesterday turned into a long day with the digging stick, a chisel and, ultimately, the angle grinder with a masonry cutoff bit on it that turned the shelf of concrete into a fine powder.

Finally, around 4 in the afternoon I finally was able to lay out the border of the walkway. I know the curve will make it a little harder (and more time consuming), but that's how I've pictured it all along and I really can't imagine it any other way.

I tried to lay out the curve with a hose, like all the books say.. but we don't seem to have any hoses without tons of kinks and it was more trouble than it was worth. The rope worked better, but there was no way I was going to be able to match the curve on the 2nd side. I finally dug some armored wire out of a trash bag of construction debris (I can only fit one in the trash can every week, so we have a little bit of a backlog of trash) and it was just flexible enough for me to shape, and just rigid enough to hold that shape when I moved it to the other side.

Next, I dug a narrow trench along the inside of the curve for the edging bricks. These bricks are laid on end so they're embedded deeper into the ground and hold everything in.

I needed to get the bricks at the edge of the stairs at exactly the right height because that permit hasn't been closed yet and the inspectors are really tough on the allowable variance in rise. Of course the sidewalk is about 3/8" higher than that point, so the walkway can't be sloped away from the house, or even level. But I got a nice gradual slope from between the sidewalk and the stair, and I'll crown the bricks in the center of the pathway so water doesn't pool up.

Here's where I was hoping to be at the end of the Saturday, but this picture was taken late afternoon on Sunday.

I think the curves are pretty even..

I needed the height of the edges to know how much more I had to level the dirt in between. It wasn't much more, but there were some high spots.

And this is as far as I got with the actual brick. By next weekend those 2 rows will be so messed up I'll have to reset them anyway.. oh well..

And what's Dan been up to while I was laboring over the bricks? In the garage taking his turn at stapling up the thin fins. It's pretty slow going.. no wonder everyone wanted so much money to install this sort of system.

You can see we took some time and marked out all the rooms to make it really obvious where everything should be - here Dan's putting up the heat in the front room. He covered a lot of ground (or.. floor) but there's still more to go.

Of course, it was all we could do to wait until Sunday afternoon for what we wanted to get started on days ago.. look at the calendar folks, it's October! That's right, it's time for Halloween! I can't believe another year has gone by and we still don't have our stuff back from storage, but somehow we've collected a bit more spooky stuff with which to decorate.

Here's Henrietta helping me hang up some decorations,

And here's how it looks after an hour or so of work (and also illustrates why we had to stop after an hour or so.. it's getting dark much earlier these days). Lots more to do, but it's already satisfyingly spooky.

The Kitchen Design......Again & Again...

And again and again and again

So we went out and hired a super-fab kitchen designer and she showed us her super designs and well....we where under impressed! She missed super simple things like, oh look someone can't be sitting at the table while someone is cooking or trying to open the frig??? Wha???? She did uh, suggest two things that we are going to incorporate into our kitchen. Can you tell what they are from looking at the new super-fab diagram (with dimensions!!!) below?

We got rid of the return against the south wall and we flopped the place for the fridge along the west wall. Now we have room for a prep sink!! Hurray!!! We also moved the stove off center on the south wall-but its still framed by windows.

Here's the view from the kitchen door looking into the room. Nothing super fab diff here.



Irene wants the cabinets along this will to have a different look than the rest of them. She wants them to look more like furniture which I think is a good idea. So, use your imagination here. Also we like how getting rid of the cabinet return here makes the room look less crowded and gives us more wiggle room for the table.

Here's the view from the sun-porch door looking into the kitchen. We've decided that we are still going to go with a real corner sink. We just can't see wasting the space in the corner by using a regular sink there. We're just going to get a bigger sink than we had at our last house. This shot also shows the dishwasher....boy I wish we actually had a dishwasher...

Here's the view from the north wall looking south. We like the oven offset to the right a bit as it gives us more room for cabinets in the opposite corner. It will be tight with the stove door down trying to walk by to get outside but we think it will be okay.

Here's the view looking from the big windows at the fridge wall. Here you can see that we flipped the position of the fridge from our earlier designs. This makes total sense, giving us plenty of counter space on the side of the fridge and near the oven. On the right of the fridge is going to be a crazy angled tall pantry cabinet. It should be a good use of that weird space and give us somewhere to keep our mops and what-not.

Alright thats it for now. We are still trying to find a quality cabinet shop to build our cabinets for us and help with a little bit of the designing stuff-if they could install them to that'd be super-duper. We think we got the overall design nailed but we are going to need help with things like...should this be drawers, shelves, pull-out shelves, where we going to fit the recycling...stuff like that.

"good thing we're a monopoly"

That's what the guy from PG&E said to me when he showed up this morning!! On their THIRD day in a row of work on this one day job..

This meter actually showed up last night. Just barely.

After recalling everyone he'd called the night before Dan finally got hold of a supervisor who put us back on the schedule BECAUSE THEY WEREN'T PLANNING ON COMING BACK
/sigh

Then he got a call that they were going to be there sometime after 4:30, so he rushed home from work to wait and wait and wait. At about 7:30 a guy showed up, but he didn't have a meter! He said he needed to run and get supplies and that he'd be back.

By about 8:30 we were pretty sure we were in for another night without hot water, but sure enough, he came back with the meter shortly after that. After he installed the meter he came through the house and checked all the gas appliances in the house. And by all I mean he lit the hot water heater and checked the dryer.. he was a little thrown by the propane camp stove sitting on top of the dryer, but everything checked out and we took hot showers!

But not everything was done. The line from the street to the meter was still the smaller, original size, thus defeating the entire purpose of having touched it at all.

This morning, the speaker of that fabulous quote showed up to swap out the line between the valve just past the sidewalk We weren't about to rip up the newly poured sidewalk again, plus, the valve was where the valve was.. they have no way to shut the gas off between the street and that valve so all of this was always about the run of pipe between the valve and the meter.

When I left for work he was grumbling about how he was going to weld in that trench, and when I came home the trench was filled back in again! just to the level of the pipe, of course.

I'd give them the benefit of the doubt to say it was filled in for safety.. since the trench was about 8" deeper than the level of the pipe, if someone fell into the pit and landed on the pipe there'd be no support for it floating in air, and it's likely it could snap. Which would be bad.
Had we not already dug up the incorrect work that had been covered up, I would be much more inclined to think that safety was the reason. As it was, it just meant we had to dig up the dirt AGAIN.

Here it is. Here's what all the fuss was about. On the right you can see the bigger yellow pipe, but for some reason there's a length of smaller pipe between that and the valve. After another hour on the phone with supervisors it was determined that everything was the correct size and the job was officially done (this was determined by them telling us this..), so I guess that's that.

We can finally fill the trench back in for good and I can start putting down a path so it's not a muddy mess every time it rains.